Ludlum Measurements 3003, Руководство пользователя

Страница: 48 / 89

Model 3003 and 3003i Multi-Detector Survey Meter / SCA
Section 4
Ludlum Measurements, Inc. Page 4-18 September 2020
High Voltage - Upon entry into High Voltage, one of the following parameters
will be selected (flashing).

Ones Place (0-9)

Tens Place (0-9)

Hundreds Place (0-9)

k Multiplier with all digits flashing (on/off)
Use the LOG button to select the appropriate parameter and use the PRG and
ACK/RST buttons to scroll through the parameter options.
Note: The k multiplier also activates left-most decimal point. If k multiplier is
used, Hundreds Place becomes the Thousands Place, Tens Place becomes the
Hundreds Place, and Ones Place becomes the Tens Place.
Calibration Constant Mantissa - Upon entry into Calibration Constant
Mantissa, one of the following parameters will be selected (flashing).

Ones Place (0-9)

Tens Place (0-9)

Hundreds Place (0-9)
Use the LOG button to select the appropriate parameter and use the PRG and
ACK/RST buttons to scroll through the parameter options.
Calibration Constant Exponent - Upon entry into Calibration Constant
Exponent, one of the following parameters will be selected (flashing).

Ones Place (0-9)

Tens Place (0-9)
Use the LOG button to select the appropriate parameter and use the PRG and
ACK/RST buttons to scroll through the parameter options.
Dead Time Correction 1 - Upon entry into Dead Time Correction, one of the
following parameters will be selected (flashing).

Rightmost Digit (0-9)

Middle Digit (0-9)

Leftmost digit (0-9)

µ/m multiplier with all digits flashing (adjustable from x.xx µ to x.xx m)
Use the LOG button to select the appropriate parameter and use the PRG and
ACK/RST buttons to scroll through the parameter options.