Ludlum Measurements 3003, Руководство пользователя

Страница: 70 / 89

Model 3003 and 3003i Multi-Detector Survey Meter / SCA
Section 5
Ludlum Measurements, Inc. Page 5-4 September 2020

When the Device is turned on and in RATE or MAX mode, the current
radiation reading and other log data is recorded at the set interval.

In SCALER Mode:
o
Auto log will be paused and will only log at the completion of each
count.
o For a continuous Scaler count (Scaler time is 0), logs will be
recorded at auto log interval.

The Data Log Table is linear; once the table is full, no further writes will be
allowed until the Data Log Table is erased.
Note:
A short press of the LOG button will start a count and
automatically log the result. An extra-long press of the LOG
button during the count will toggle the display between the timer
and reading.
Format
The datalogging format is as follows:

Format Version (1 Byte)

Month (1 Byte)

Year (2 Bytes)

Day (1 Byte)

Hour (1 Byte)

Minutes (1 Byte)

Seconds (1 Byte)

Logged Value (4 Bytes)

Range (1 Byte)

Units (1 Byte)

Mode (1 Byte)

Detector Number (1 Byte)

Status (1 Byte)

Reserved (2 Bytes)

Elapsed Count Time in seconds (4 Bytes)

Scaler Count Time in seconds (4 Bytes)

Location ID (32 Bytes)