Lucent Technologies DSP1611 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 443

Lucent Technologies DSP1611 Скачать руководство пользователя страница 23

DSP1611/17/18/27/28/29 DIGITAL SIGNAL PROCESSOR

Information Manual

Introduction

April 1998

1-4

DRAFT COPY

Lucent Technologies Inc.

1.2 Typical Applications

(continued)

SPEECH

CONSUMER

Many of these applications can use standard algorithms that have been designed to reduce computational and
data transfer requirements for these DSPs. These algorithms have been coded in DSP1600 assembly language
and are available to registered users via Lucent’s DSP tech support web page at
http://www.lucent.com/micro/wam/tse.

1.3 Application Support

The use of the DSP1611/17/18/27/28/29-ST Support Tools and the DSP1600-HDS Hardware Development Sys-
tem aids application development.

1.3.1 Support Software Library

Software development tools to help create, test, and debug DSP1611/17/18/27/28/29 application programs are
available from the Lucent Technologies’ appropriate support software library for the particular device. Each sup-
port software library consists of an assembler, linker, and software simulator that run on

Sun-4

1

,

UNIX

2

, or

MS-

DOS

3

operating systems. The software includes a menu driven,

3

based, graphical user interface.

The assembler transforms DSP1611/17/18/27/28/29 source code into object code in a standard format (COFF)
that is then processed by the linker. The assembler contains a preprocessor similar to the C preprocessor and pro-
vides the features of a full macro assembler. The linker creates load modules for the simulator by combining object
files, performing relocation, resolving external references, and supporting symbol table information for symbolic
testing. The DSP1611/17/18/27/28/29 software simulator provides access to all registers and memory and allows
program breakpointing. The simulator also provides the user interface to the DSP1600 Hardware Development
System.

1.3.2 Hardware Development System

The DSP1600 JTAG communication system (JCS) supports application system hardware development and soft-
ware testing.

Recognition

Feature extraction, spectrum analysis, pattern matching

Synthesis

LPC, format synthesis

Coding

CELP, VSELP, ADPCM, LPC, multipulse LPC, vector quantization

Studio Electronics

Digital audio

Answering Machines

Speech coding/decoding, system control

Entertainment

Speech coding/decoding

Educational

—

1.

Sun, Sun Microsystems, the Sun logo, SunOS, and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the United
States and other countries.

2.

UNIX is a registered trademark licensed exclusively through X/Open Company Ltd.

3.

MS-DOS and Windows are registered trademarks of the Microsoft Corporation.

«
...
21
22
23
24
25
...
»

Содержание DSP1611




























































































































































































































































































































































































































































Отзывы:

Нет отзывов