①
①
①
①
Position control
This mode sets the position of implements freely
by position control lever operation. Generally,
this mode is used for tiller, fertilizer distributor,
mower, rake etc. In this case, operate the lever
as follows.
1.Push position control lever forward and the
implement lets down by its own weight.
2.If the position control lever is on random position,
the implement stops at the height corresponding
to the lever position.
3.To keep the height of implement in a desired
range, restrict the lever to the lowest point with
Stopper A
Position
control lever
range, restrict the lever to the lowest point with
stopper A.
②
②
②
②
Draft control (if fitted)
This mode maintains the load of the implement
consistently by detecting the draft load and
transmitting it to the hydraulic valve. Generally,
this is used for the implement which receives the
draft load.
In this case, operate the lever as below.
1. Move the draft control lever forward fully (Down)
and the implement lets down by its own weight.
2. The volume of load that the hydraulic valve
receives shall be determined according to the
position of draft control lever. That is, the more
the lever moves back (Up), the more the
In working
by draft load
control
In working by depth control
Sensor fixing
lever
Position
control lever
3
3
3
3
- 29
implement rises up by a little draft load.
3. If you want to lift the implement, use the position
control lever instead of draft control lever.
③
③
③
③
Mixed control
It is available to work by mixed control mode by using 2 levers at the same time as mentioned on the
above.
At this time, adjust the position of implement by position control lever and adjust the draft load
applied to the implement by draft control lever.
Draft control
lever (if fitted)
Stopper A
