LS tractor R4041 Скачать руководство пользователя страница 73

Страница: 73 / 125

(6) Reference of PTO shaft

PTO gear

PTO / Engine speed

Revolution direction

Ground clearance

540 / 2409 rpm

750 / 2375 rpm

1000 / 2381 rpm

Clockwise (direction from which looking at PTO shaft)

(0.34 in)

620mm (24.4 in)

Shaft dimension

(Unit : inch)

(3.0 in)

(1.5 in)

(0.34 in)

(1.1 in)

)

PTO shaft
protection cap

PTO safety cover

(7) PTO safety cover and

protection cap

Attach PTO safety cover always.

If the safety cover is damaged or removed,

replace it with a new one.

When PTO is not used, apply grease and insert

the PTO protection cap.

- 15

▶

If you contact the rotating shaft, it may cause a severe injury.

- DO NOT touch shaft which is rotating.

- DO NOT remove the safety cover.

- Avoid loose clothes that can easily be rolled up in the revolving shaft.

Warning

the PTO protection cap.

Содержание R4041






























































































































Результаты поиска

Содержание R4041

Отзывы:

LS tractor R4041, Руководство оператора, Страница: 73 / 125

Результаты поиска

Содержание R4041

Отзывы: