(5) Instrument panel (EZ-Shift)
Tachometer
Parking
indicator
PTO operation
indicator
Battery
charging
Engine oil
pressure
indicator
Pre-heat
indicator
Eng. coolant
temperature
gauge
Quick turn
indicator
(option)
4WD
indicator
(option)
Forward
indicator
Neutral
indicator
Reverse
indicator
Not used
Not used
Not used
Not used
High speed
Low speed
indicator
Turn signal
indicator (RH)
Fuel filter
warning
indicator
High beam
indicator
charging
indicator
indicator
Fuel level
gauge
Hour meter
Turn signal
indicator (LH)
Error code
display
Clock
Forward indicator : When the EZ-Shift shuttle lever is placed on forward position, this indicator turns
on.
Neutral indicator : When the EZ-Shift shuttle lever is placed in neutral position, this indicator turns on.
Reverse indicator : When the EZ-Shift shuttle lever is placed on reverse position, this indicator turns
on.
Hour meter : It displays accumulated running hour of the engine. The operating hour “0005.3” means
the tractor has been operated for 5.3hr (5 hours and 18 minutes).
Clock : It shows current hour and minute.
Error code display : Error code relating to the EZ-Shift system is displayed. (For further details, See
next page)
Not used
3
3
3
3
- 19
High / Low speed indicator : It is used to check the status of the clutch pedal sensor, main clutch
control switch and range gear sensor related to EZ-Shift control. (See page 3-22)
Refer to the mechanical type instrument panel about other indicators and gauges. (See page 3-1)
▶
When placing the key switch to “ON” position, “Low speed indicator” sometimes
turns on or not, depending on the position of the range gear shift lever. It’s not a
failure but a signal of the electrical device check related to EZ-Shift control.
(For further details, See page 3-22)
Notice