LS Industrial Systems XBC-DN10E, Руководство пользователя

Страница: 483 / 542

Chapter 8 Option Boards and Memory Module
XBC E-Type Main Unit 8-20 Ver. 1
4. Parameter setup
a. Action command
Type
Device status information (based on slot 9, ch0)
Ref.
CH0 Information
Enable counter U9.0.0 0: disable, 1: enable BIT
Enable internal preset U9.0.1 0: disable, 1: enable BIT
Count inc./dec. flag U9.0.3 0: INC, 1: DEC BIT
Latch counter enable U9.0.6 0: disable, 1: enable BIT
Pulse input mode U9.5
0: 1-phase 1-input
1: 1-phase 2-input
2: 2-phase 2 multiplication
INT
Internal preset setting value U9.6 -2,147,483,648 ~ 2,147,483,647 DINT
b. Monitor area
Type
Device status information (based on slot 9, ch0)
Ref.
CH0 Information
Carry flag U9.1.0 0: disable, 1: enable BIT
Borrow flag U9.1.1 0: disable, 1: enable BIT
Current counter value U9.2 -2,147,483,648 ~ 2,147,483,647 DINT
Error code U9.4 Indicates error code INT
8.7.2 Error code
Error
code
(Dec.)
Error contents Ref.
21 Pulse input type range setting error
22
CH1(3) RUN request while CH0(2) 2-phase RUN
* CH1(3) is not available when CH0(2) operate as 2-phase mode
25 Internal preset value exceeded counter range
Note
If more than two errors occur, the latest error code is saved and previous error code is removed.