LS Industrial Systems XBC-DN10E, Руководство пользователя

Страница: 394 / 542

Chapter 6 Instruction Details
XBC E-Type Main Unit 6-277 Ver. 1
6.36.4 SCAL, SCALP, DSCAL, DSCALP, RSCAL, RSCALP
Instruction
Area Available
Step
Flag
P M K F L T C S Z D.x R.x
Con
st.
U N D R
Error
(F110)
Zero
(F111)
Carry
(F112)
SCAL(P) /
DSCAL(P) /
RSCAL(P)
S1 O O O - O O O - O - - O O O O O
4~7 O - -
S2 O O O - O - - - O - - - O O O O
S3 O O O - O - - - O - - - O O O O
D O O O - O - - - O - - - O O O O
Operand Desciprtion Data size
S1 Device number of input data to input INT / DINT / REAL
S2 Scale upper limit of input data INT / DINT / REAL
S2
+1
Scale lower limit of input data INT / DINT / REAL
S3 Scale upper limit of output data INT / DINT / REAL
S3
+1
Scale lower limit of output data INT / DINT / REAL
D Device number to save output data INT / DINT / REAL
[Flag Set]
Flag Content
Device
number
Error In case of error in lower limit and upper limit of input data F110
Error In case scale upper limit of input data is same with lower limit F110
1) SCL, DSCAL, RSCAL
(1) S1, input value ran
ged in S2+1≤S1≤S2 convert scaling to output value ranged S3+1≤D≤S3.
(2) If S1 is out of range [S2+1~S2], each is replaced into S2+1, S2.
(3) If S3 < S3+1, scaling conversion is available.
(4) When it is set as scale upper limit and lower limit change, if error flag is On, output changes to 0.
(5) If scale upper limit and lower limit of input data is same, since some denominator becomes 0 in the
following output condition, error flag is On and output changes to 0.
(6) Output condition
S1 S2
S2 S1 S2+1
S2+1 S1
<
<
S3 D so
D so
S3+1 D so
=
=
=
S3 - S3+1
S2 - S2+1
(S1 - S2) + S3
COMMAND
means SCAL
COMMAND
P S1 S3
SCALP
DSCALP
RSCALP
S1 S2 D
D S2
S3
SCAL
DSCAL
RSCAL