LS ELECTRIC XGT Series, Руководство пользователя, Страница: 663 / 804

Chapter 15. XG-SIM
15-28
Error code Meaning
371 Speed override command may not be executed if not operating
391 Continuous operation command may not be executed if not operating
401 Inching command may not be executed during operation
431 Auto operation point return command may not be executed during operation
441 Start step no. change command may not be executed during operation
461 Position teaching command may not be executed during operation
481 Internal emergency stop
Notes
-
Detail parameter of positioning module is set in a separate APM package, not in XG5000. To set
the parameters used in the positioning module, it is necessary to set APM package operation data
and save the project file as follows. In addition, APM project file should be located in a same
folder in which XG5000 project file is saved.
BxSyz.apm (x base number, yz slot number, not case-sensitive)
Base Slot Project name saved
0 0 B0S0.apm
0 10 B0S10.apm
1 0 B1S0.apm
1 11 B1S11.apm
2 0 B2S0.apm
2 12 B2S12.apm
-
For detail settings of APM module parameter, refer to APM package user’s manual.
It is possible to check the status of APM module such as the current position in ‘Channel’ of XG-SIM window.