LS ELECTRIC XGT Series, Руководство пользователя, Страница: 299 / 804

Chapter 7. Programming Convenience
7-2
Step Displays the steps inside the program.
Type
The following signs are displayed for the type of instructions;
-( )-: Coil
-(/)-: Reverse coil
-(S)-: Set coil
-(R)-: Reset coil
-(P)-: Positive-conversion detection coil
-(N)-: Negative-conversion detection coil
-| |-: Normally open contact point
-|/|-: Normally closed contact point
-|P|-: Positive-conversion detection contact point
-|N|-: Negative-conversion detection contact point
-[F]-: Application instruction
Instruction
Displays the application instruction used and the sequence of the operand if used as
the operand of an application instruction.
Variable Displays the variable name if a variable is declared for the device.
Comment Displays the description if the description is input for the device.
1) Data Alignment
Click the column header to align the applicable column. Whenever the column is clicked, it will be aligned in
the ascending and then descending sequence repeatedly. A triangle will be displayed on the basic column
of the present alignment. The normal triangle means that the alignment is in the ascending sequence, and
the reverse triangle means that the alignment is in the descending sequence.
Example.1) Alignment in the ascending sequence based on the device names
Example.2) Alignment in the descending sequence based on the device names
2) Find
It is used to go to the position of the program using the selected device. Double-click the applicable line, or
click the right mouse button to select [Find] on the menu.