LS ELECTRIC XGT Series Скачать руководство пользователя страница 516

Страница: 516 / 804

Chapter 11. Communication and Special Function Blocks

11-29

1. Confirm the connection status with PLC.

2. Select [PLC]-[Selected I/O modules OFF] on the menu.

11.4.6 Change Current Value

In order to change the current value, it shall be in the connection status with PLC and in monitoring mode.

Click the contact point to change the data value of the selected contact point to ON or OFF.

[Sequence]

1. Confirm the connection status with PLC and the monitoring mode.

2. Position the mouse cursor on the I/O module’s contact point to change the cursor to hand shape.

3. Click the I/O module’s contact point.

Notes

Move the mouse onto I/O contact point to display the assigned device on the status bar.

If I/O skip is specified, it will be displayed always OFF.

If I/O compulsory input and output is specified, the specified value will be always displayed.

11.4.7 Information Display of Power Module

Information of Power Module displays base power-cut history including date, time and details in which

power-cut bases are displayed.

[Sequence]

1.Confirm the connection status with PLC.

2. Select one method among those below to display the module information.

With Power Module selected, select [PLC]-[Module Info.] on the menu.

With Power Module selected, click the right button of the mouse to select [Module Information] on the

menu.

With Power Module selected on the Module Information window, click the right button of the mouse to

select [Module Info.] on the menu.

If Power Module is selected on the screen, press Enter.

Double-click the mouse positioned on Power Module displayed on the screen.

Notes

If the number of power-cuts exceeds 100, only up to 100 can be displayed on the screen.

No module information is available for empty slot and I/O module.

Содержание XGT Series





































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание XGT Series

Отзывы:

LS ELECTRIC XGT Series, Руководство пользователя, Страница: 516 / 804

Результаты поиска

Содержание XGT Series

Отзывы: