LRX™ SCORPION
Check on line for the latest updates at www.lrx-lighting.com
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
10
10
GEL FRAMES
To install gel frame holders, loosen four thumb screws located on the front
of the fixture housing.
Slide the keyhole slots located on the gel frame holder over the loosened
thumb screws and lower into place.
Tighten thumb screws and install the four safety clips provided.
The outside gel slot must be used first as this will hold the two gel frame
holders together. No gel material is to be used on the side of the filter frame
that has been slotted. These slots will mate with bend returns on the outer
most slot of the filter frame holder. See illustration.
Install the supplied gel frame safety pins in the top two corners. See
illustration.
SAFETY CABLES REQUIRED
