LRX SCORPION DAILY CHECKLIST
Read and understand LRX Scorpion Manual before proceeding with daily checklist
and/or operation of any LRX fixture. Manual available in fixture transport case or online
at www.lrx-lighting.com.
POWER UP CHECKS
TRUSS CONNECTION POINT
CABLES
IF THE FIXTURE FAILS ANY PART OF THIS INSPECTION, REMOVE POWER, LOCK OUT AND REPORT TO YOUR
SUPERVISOR IMMEDIATELY. DO NOT ATTEMPT TO MAKE REPAIRS. ALL REPAIRS TO LRX LIGHTING
FIXTURES ARE TO BE PERFORMED BY AN LRX AUTHORIZED DEALER ONLY.
HEAD STRUCTURAL INSPECTION
REFERENCE IMAGES
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
#
#
#
#
GOOD /
FAIL
GOOD /
FAIL
GOOD /
FAIL
GOOD /
FAIL
FIG. 1
FIG. 2
CUSTOMER:
DATE:
LOCATION:
FIXTURE SERIAL #:
INSPECTED BY:
SIGNATURE:
19.
20.
21.
22.
23.
24.
25.
Confirm the combined weight of all accessories are within the allowable weight restrictions of the aerial lifting device or supporting structure.
Notes:
Inspect fixture attachment hooks
head structure for damage, cracks or loose bolts.
and
Inspect ratchet straps. There must be a minimum of two wraps around each ratchet drum.
Ensure the straps capture truss
strap clips are correctly placed and latched.
and
Ensure hanger keeper bolts are installed completely.
Inspect overall condition of fixture / structure.
Ensure all covers are installed
in good condition.
and
Inspect all lamps, retaining grills
mounting hardware.
and
Inspect lamp sockets, contacts
wires.
and
Inspect gel frame receivers.
Inspect gel frame holders
mounting hardware.
and
Inspect Socapex cable input connectors and contacts.
Inspect data connectors and contacts.
Inspect condition of U ground plug, wire
strain relief.
and
Provide safety cables where required for accessories.
Ensure no components have been modified outside of manufactures specifications.
Inspect truss for damage, cracks, dents, distortion.
Inspect truss mounting plates for damage, cracks and distortion.
Inspect all fasteners and hardware for damage and ensure all fasteners are secure.
Inspect truss supporting structure and capacity.
Inspect data cable, connectors and contacts for damage.
Ensure all power and data cables are correctly connected to fixture.
Ensure proper electrical power is supplied.
Ensure all power and data cables have a secure strain relief.
Ensure hanger LED display and keypad operating properly.
Inspect hand controller for damage and proper function.
Test tilt, pan and flood / spot function.
HANGER BOLTS
ATTACHMENT
HOOKS
LIFTING HANDLE
RATCHET
STRAPS
SOCAPEX
CONNECTIONS
GEL
FRAME
KEEPER
PINS
GEL FRAME
HOLDERS
GEL FRAME
BOLTS
LAMP
RETAINING
GRILL
GEL FRAME
SAFETY CLIPS
GEL FRAME
SAFETY
WIRE
ATTACHMENT
POINTS
DATA
CONNECTORS
LED DISPLAY
00299
