Lovibond MD 610, Инструкция по эксплуатации

Страница: 171 / 360

163
MD 610_1c 09/2015
10. Remove the vial from the sample chamber and empty
the vial.
11. Add 10 ml prepared water sample to the same
vial .
12. Fill the vial with drops of the same size by holding the
bottle vertically and squeeze slowly:
10 drops KS63 (Thioglycolate)
13. Close the vial tightly with the cap and swirl several times
to mix the contents.
14. Fill the vial with drops of the same size by holding the
bottle vertically and squeeze slowly:
10 drops KS160 (Total Hardness Buffer)
15. Close the vial tightly with the cap and swirl several times
to mix the contents.
16. Place the vial in the sample chamber making sure that
the marks are aligned.
17. Press
TEST
key.
Wait for a reaction period of 15 minutes (note 1,
page 161).
After the reaction period is finished the measurement
starts automatically.
The result is shown in the display in mg/l total iron or, if
a filtered sample was used, in mg/l total soluble iron.
Countdown
15:00
Zero accepted
prepare Test
press TEST