16
Push the carriage bolt through the hole in
the upright of the back part from the
outside of the loom. Slide the large washer
and the 36 mm spacer bushing over the
carriage bolt.
Place the barrel nut into the hole of the
brake pedal and turn the threaded hook so
far into the nut, that the threaded end
sticks about 1-3/4” (2 cm) through.
Slide the brake pedal over the spacer
bushing onto the carriage bolt, than the
small washer and the cap nut. Tighten the
cap nut well.
Take the threaded eye and remove a nut
and one washer.
Put the threaded eye through the hole in
the brake pedal.
Replace the washer and nut and tighten
the nut. Make sure to put a screwdriver
through the eye and line-up the direction of
the eye with the eye in the upright of the
back part of the loom.
Содержание Octado
Страница 2: ......
