17
Hook the brake spring to both eyes.
Position the large eye of the brake cable
over the end of the carriage bolt and guide
the cable one turn around the brake disk.
Put the eye on the other end of the brake
cable over the hook of the brake pedal
while you push the brake pedal down.
When you let go of the brake pedal, its
position should be approximately
horizontal. If not, you have to adjust it with
the threaded hook at the end of the pedal.
Shorten by screwing the hook in more, you
will lower the pedal. Of course you have to
unhook the cable before turning the hook
inward or outward.
Take the hook and cord out of the
hardware bag. Guide the cord around the
stem of the screw eye of the pedal and
attach it to the hook.
You can put the hook around the spacer
bushing of the hinge point of the back
frame.
This will take the tension from the brake
cable, and allow you to beam-up the warp
without having to keep the brake pedal
pushed in all the time.
Содержание Octado
Страница 2: ......
