21
Turn the black buffers into the top hole in
the side rails of the loom.
When you install a fly shuttle, you need to
install these buffers into the bottom holes.
Connect the lower reed tray (the one with
the slanted side) to the uprights: Place the
barrel nut into the hole on the end of the
lower reed tray. Slide the upright with the
slit in it, over the lower reed tray. Place the
bolt with washer in the hole and screw it
into the barrel nut. Tighten the bolt and, in
the same way, assemble the other up right
on the other side of the reed tray.
Turn the vertical hinges into the bottom of
the uprights. By turning these hinges in
and out, you can adjust the height of the
reed exactly after threading through your
first warp.
Place the assembly of uprights and lower
reed tray into the loom. First guide one
hinge along the side rail and then the
other.
Содержание Octado
Страница 2: ......
