Louet Octado, Инструкция по эксплуатации

Страница: 33 / 42

31
The bent piece of steel wire in the
hardware bag is the anchor. The anchor
will pull the dobby roller a quarter turn
every time you depress the dobby treadle.
Take the longer of the two cords. Put the
end through the last hole in the other end
to make a loop. The anchor goes through
the loop.
Mounted at the backside of the reversing
disk are threaded hooks to connect the
anchor cords to. Insert the end of the
longest anchor cord through the screw eye
on top of the reversing disk and attach the
second or third hole of the threaded hook.
Do the same with the other anchor cord at
the bottom of the reversing disk.
With the white nylon nuts you can adjust
the length of the cords.
Now connect the reversing disk with the
dobby treadle. Put the hook with washer
and knurled nut from the bottom through
the eye of the treadle and hook the cord to
it. You can adjust the cord by putting the
hook through a different hole, or for fine-
tuning, use the knurled nut.
Slip the spring to one side of the brace of
the disk. Now the cord needs to be so tight
that it keeps the brace in a horizontal
position.