Lorex LHD200, Инструкция по эксплуатации

Страница: 119 / 139

103
Appendix B: Connecting a PTZ Camera
To enter PTZ camera settings in the DVR:
1 Right-click to open the Menu Bar and click the Main Menu button ( ). Enter the system
password.
2 Click Device and select the PTZ tab.
3 Configure the following according to your PTZ
camera’s specifications:
• Channel : Select the channel the PTZ camera
is connected to.
• Protocol : Select from Pelco-D or Pelco-P .
• Baud rate : Select the PTZ camera’s baud rate.
• Data Bit : Select from 5~8 data bits.
• Stop Bit : Select from 1 or 2 stop bits.
• Parity : Select from None, Odd, Even, Mark
or Space .
• Cruise : Select Enable to enable PTZ cruise.
• Address : Enter the PTZ camera’s address
Use the Copy To drop-down menu to copy the
PTZ settings to multiple channels.
4 Click Apply to save your settings.
Using the PTZ Menu (Local DVR)
To control the PTZ camera locally on your DVR:
1 Select the channel that the PTZ camera is connected to.
2 Press and hold the PTZ button on the front panel of the system for 6 seconds. Enter the
system password. The PTZ menu opens.
PTZ button
Press and hold for 6 seconds