Lorex L19LD800 Series, Инструкция по эксплуатации

Страница: 34 / 74

Event Menu
34
Motion Setup
Controls the actions when Pixel-based motion is
detected on a Channel.
•
HOLD TIME – Set the length of time that
the event action will occur (i.e. Buzzer,
Onscreen display, etc.)
•
CH1~CH8 – Sets the alarm for each
channel to ON or OFF.
•
ZONE – Set the Motion Detection Area for
each camera:
o
Grid : Select blocks in the grid to
turn the motion detection area ON
or OFF. (Clear = ON, Pink = OFF).
o
Set All : Turns on all sections
o
Clear All : Turns off all sections
o
Inverse : Reverses the current
setup
o
Test : Test the motion detection on
that camera. Detected fields are
highlighted.
•
ACTION – Set the behavior for the system when an event is
detected on the specified channel:
o
All : All actions occur
o
Relay : A relay output will occur to the Alarm-Out
function
o
Buzzer : An audible buzzer will sound when an event is
detected.
o
Email : An email will be sent (based on user and LAN
settings)
o
Network : An alert will be sent to the remote client
(based on LAN settings).
•
RECORD – Select the cameras to record when an event is
detected. Select ALL Cameras, each camera separately or a
combination of individual cameras.