Network Setup Menu
45
Network Setup Menu
Controls the network settings for:
•
LAN –
Network settings for the System
•
SERIAL
– Controls for serial devices (i.e.
POS input).
•
DDNS
– Settings for remote access over
the internet
•
NOTIFICATIONS
– Automatic email or
network notification when an event occurs
•
SITE
– Controls the site specific settings.
LAN Setup
Controls for the System network settings
•
TYPE –
Set the network setting detection
to Manual or DHCP. If set to DHCP, the
network information will be assigned by
the network router.
•
TCPIP
– Setup for the system’s network
settings. IF set to DHCP, the settings will
not be accessible. If set to Manual, the
settings will need to be manually entered:
o
IP Address
o
Subnet Mask
o
Gateway
o
DNS Server
– Is set in the system
by default to point to the Lorex
DDNS server. Do not change this
unless advised by a technical
support representative.
o
Port
– Setup for the System Ports for remote connection.
NOTE
: These ports will need to be changed if using multiple
systems at one location.
