L19LD800 Series - Back
14
L19LD800 Series - Back
1 2
3
4
1.
ALARM I/O & RS-485
TERMINAL
– Connection point for external devices:
•
The Alarm Block is used to connect devices such as a motion sensor, door/alarm
sensor, or time lapse VCR for Alarm Recording. Refer to appendicies for Alarm Block
Configuration. Alarm devices are not included.
•
The RS-485 Block is used to connect devices such as a keyboard or a PTZ
(Pan/Tilt/Zoom) Camera. Keyboards and PTZ Cameras are not included.
2.
RS-232
- Connects to devices such as a keyboard and a POS device (not included).
3.
ETHERNET (LAN) PORT -
Connects the monitor to a router for connection to the internet. Refer to
appendicies for Remote Connection setup.
4.
6-PIN DIN CAMERA INPUTS
- Channel 1~4 Camera inputs (for cameras with 6 Pin
DIN connections).
Cameras with 6 Pin DIN connections draw power from the System - additional power
adaptors are not needed.
5.
BNC VIDEO INPUTS
- Channel 5~8 camera inputs (used to connect Cameras with BNC connection
type). Cameras with BNC connections require an additional power adapter.
6.
POWER INPUT
- Connect the AC power using the power cord provided with the unit from the
monitor to an electrical outlet
5
6
Rear Ports with Labels:
