LOMBARDINI MARINE Kohler KDI 1903TCR-MP, Руководство пользователя

Страница: 37 / 56

_04
6
37
B
C
D
A
E
E
G
F
B
C
A
E P
P
P
H
10 mm
E
6.11
6.12
6.13
6.14
INFORMATION ABOUT REPLACEMENTS
EN
6.5 Alternator belt replacement
Important
• Before proceeding with operation, carefully read Par. 3.3.2 .
1. Loosen the screws A and B.
2.
Push the alternator C in the direction of the arrow D and
remove the belt E.
3. Push the alternator C in the direction of the arrow D.
4. Insert the belt E on the pulleys F.
5.
Pull the alternator C in the direction of the arrow G.
6. While tensioning the alternator C, first clamp screw A
(tightening torque at 25 Nm) and then screw B (tightening
torque at 41 Nm).
7. Check the tension of the belt E with the instrument
(DENSO BTG-2), positioning it in point
P (the
tension must be between 350 and 450 N).
Should the correct tool not be available, the belt tension
can be checked by applying a force in the direction of
arrow H of approx' 10kg on the point
P . When correctly
tensioned the belt must show a movement of less than
10mm.If not adjus it.
8. If the tension values do
not correspond, tighten
screws A and B, then repeat
operations 6, 7 and 8.
ED0053032450