t
t
h
h
e
e
r
r
m
m
o
o
c
c
o
o
m
m
f
f
o
o
r
r
t
t
P
P
N
N
A
A
1
1
5
5
/
/
2
2
0
0
/
/
2
2
5
5
/
/
3
3
0
0
Lohberger Heiztechnik
GmbH
Operating Instructions
N29/HB/GB
page 21
Lohberger Heiztechnik GmbH, A-5020 Salzburg-Bergheim, Rechtes Salzachufer 40
Tel. 0662-450444-0, Fax-DW 9
Es gelten unsere aktuellen allgemeinen Geschäftsbedingungen. Irrtum, Druckfehler und technische Änderungen vorbehalten
7.7
Menu item "Heating circuit"
Heating circuit 1 Operation mode
>Automatic
High / Low<:
The requested ambient temperature is automatically selected via timeprog
set in "H-Circ. 1 Timeprog". A high (High temperature) or low (Low
temperature) ambient temperature can be selected, see "H-Circ. 1
Temperatures“
>High-Temp.<:
It is heated until the higher ambient temperature setting is reached
(timeprog switched off).
>Low-Temp.<:
It is heated until the lower ambient temperature setting is reached
(timeprog switched off).
>Frostprotection<:
It is heated until the frost protection ambient temperature setting is
reached (timeprog switched off
Heating Start:
This function is designed for summer, if the heating shall be activated after
a bad weather period temporarilly (for a few hours).
If you push the buttons displayed next to "Heating start", the heating is
activated for 6 hrs.
Heating Stop:
If you push one of the above-mentioned buttons again, the heating
switches off.
In the last lone "Duration 359 min" the remaining loading duration is
shown.
Heating circuit 1 Monitor:
Room Setv:
All rooms heated by heatingcircuit 1 shall be heated up to this value.
Room Act:
This value is measured by a "room device" (temperature probe with
temperature-correction dial), in one of the rooms of the heating circuit.
If no room device is in place, no value will be displayed here.
NOTICE: As the control receives no feedback from the room in this case,
the actual ambient temperature can deviate significantly from the
requested value (room set).
Flow Act:
This temperature is measured at the flow of heating circuit and states how
Status line
