Logicube TALON ULTIMATE, Руководство пользователя

Страница: 55 / 125

DEFAULT PASSWORDS
Logicube Talon Ultimate™ User’s Manual
47
Wipe Patterns – Allows the user to set a specific pattern to use for wiping the
drive. The number of passes is customizable (up to 7 passes) along with the type
of data written for each pass. In addition, a 7-pass DoD wipe can be set.
Format – Formats the Destination using the EXT4 file system or NT file system
(NTFS) either with or without AES-256 encryption.
4. USB DEVICE – Allows the user to view the contents of any drive connected to the Talon
Ultimate from a computer connected via USB. When using this type of operation, all
drives connected to the Talon Ultimate are write-protected. Requires the USB Device
Port option to activate.
5. LOGS – Display logs of each task that has been performed on the Talon Ultimate.
6. STATISTICS – This will display four tabs that include:”
About – Displays information about the Talon Ultimate
Advanced Drive Statistics – Shows raw S.M.A.R.T. data on any drive connected
to the Talon Ultimate.
Options – Shows available options and which ones are installed.
Network Interface Stats – Shows information on the Network Interface/
7. SYSTEM SETTINGS – This mode allows changes to the system settings on the Talon
Ultimate which include the following:
User profiles/configurations – Allows the user to create, save, apply, or delete
user profiles/configurations.
Passwords – Allows the user to set a password to lock the Talon Ultimate from
any configuration changes.
Encryption Settings – Sets the cipher mode (VCRPYT, TC-XTS, CBC, or ECB),
Cipher, IV Generation, and the encryption password.
Language/Time Zone – Sets the language on the Talon Ultimate’s menu and
change the system’s Time Zone.
Display – Sets the Talon Ultimate’s display/screen brightness and enable/disable
Stealth Mode
8. NETWORK SETTINGS – Allows certain services to be enabled or disabled. Also shows the
network interface status and allows the user to set proxy settings (if required by their
network).
9. SOFTWARE UPDATES – Perform software updates on the Talon Ultimate. Software can
be updated over an internet connection (from network) or from a USB flash drive.
10. POWER OFF – Allows the user to turn the Talon Ultimate unit off or restart it by using
the Graphical User Interface (GUI). Also allows a drive timeout to be set, powering down
drives when not in use.
5.0.1 Imaging
This type of operation allows the imaging of a Source to a
Destination. There are two different imaging modes and
several settings to choose from. These selections should be
performed in order from left to right.