Logicube TALON ULTIMATE, Руководство пользователя, Страница: 27 / 125

QUICK START
Logicube Talon Ultimate™ User’s Manual
19
different Destination drive port or repository can be selected.
After selecting the next Destination/Repository to be used, tap
the
OK icon.
If the next Destination drive selected requires
formatting, the Talon Ultimate will show the
(format) icon allowing the drive to be formatted.
When the imaging operation is finished, all
subsequent Destinations/Repositories used will
contain the same Case/File name and the next
DD, E01, or EX01 file. For example, if the last file
on the first Destination used is *.E23, the next
Destination/Repository used will start with file
*.E24.
3.2 Hash / Verify
A hash or verify operation can be performed to any drive connected to the
Talon Ultimate. Performing a hash or verify task will instruct the Talon
Ultimate to calculate the hash for the specified drive or validate the hash value
for that drive. There are two modes available:
DRIVE HASH – This mode will hash any connected drive on an active Source or
Destination port. This mode is Logical Block Address (LBA) based and will hash
drives based on the number of LBAs. If multiple drives are selected to be
hashed, the Talon Ultimate will hash up to the LBA value of the smallest capacity
drive. If drives with different capacities need to be hashed, it is recommended
to start one task per drive.
CASE VERIFY – This mode will hash cases created by the Talon Ultimate (DD,
E01, Ex01) for verification purposes. There are two settings for this mode:
o
Primary – This will verify the primary hash of the image.
o
Both – This will verify both primary and second hash of the image.
To perform more than one task at a time (Image, Hash, Wipe/Format), the Multi-
Task Option must be purchased and installed.