Logicube TALON ULTIMATE, Руководство пользователя

Страница: 43 / 125

IMAGING
Logicube Talon Ultimate™ User’s Manual
35
HPA – Host Protected Area can limit the size of a hard drive, but
it can also change many other settings such as speed and
S.M.A.R.T. status.
DCO – Device Configuration Overlay limits the size of a drive
only. For example, a 160GB drive can be made to look like a
100GB drive to a computer.
Drive Trim is a special setting when the mode is
set to Drive to Drive. For more information on
Drive Trim, please see
section 6.0.3.5.1 Special
Settings for Drive to Drive .
4.0.3.3 Error Handling (Common Setting)
When bad sectors are encountered on the Source drive, Talon
Ultimate can either skip the bad sectors or abort the imaging
operation. This allows flexibility on what to do when bad sectors
are found on the Source drive.
When bad sectors are encountered, and error
handling is set to
Skip , Talon Ultimate will write a
zero on the corresponding sector or position in
the Destination drive or file.
Talon Ultimate also has a setting for error granularity. There are
3 options:
1 sector (512 Bytes)
4096 Bytes (8 sectors)
64 KIB (128 sectors)