Logicube TALON ULTIMATE, Руководство пользователя, Страница: 81 / 125

DEFAULT PASSWORDS
Logicube Talon Ultimate™ User’s Manual
73
5.0.7.3 Encryption Settings
The Talon Ultimate allows imaging drives onto a Destination
where the data on the Destination drive is encrypted.
Destination drives that are encrypted by the Talon Ultimate can
be decrypted by using the Talon Ultimate or third party
software (VeraCrypt, TrueCrypt, or FreeOTFE).
For in-depth information on encrypting and
decrypting a drive using the Talon Ultimate, or
decrypting a drive using VeraCrypt, TrueCrypt, or
FreeOTFE, please see
Chapter 7: Drive Encryption
and Decryption.
There are 4 parameters that must be configured before
encryption can be used. These 4 parameters are necessary to
decrypt and read the Destination drive properly:
Cipher Mode – Users can choose between VCRYPT , TC-
XTS , CBC (cbc-plain64.) or ECB (cbc-essiv:sha256) cipher
modes.
Cipher – At this time, only the AES-256 cipher is
supported.
IV Generation – Unavailable when VCRYPT or TC-XTS
cipher mode is selected. If CBC or ECB cipher mode is
selected, users can choose between
PLAIN64 and
ESSIV:SHA256 .
Encryption (Password or Key) – Users must choose their
own encryption password/key.
There are 2 imaging modes in which encryption can be used:
Drive to File – Images the Source to any of the following
image output formats: DD , E01 , and EX01 . This will have
a partition level encryption where only the partition (on
the Destination or Repository) where the images are
created will be encrypted.
File to File – Image specific files (by filename, extension,
etc.). The files will be sorted by path (based on where
the file is located on the Source and each file will be
hashed. This will have a partition level encryption where
only the partition (on the Destination or Repository)
where the images are created will be encrypted.
There are many articles on the Internet about
AES-256 encryption and the different modes and
settings that come with encryption.