REMOTE OPERATION
Logicube Talon Ultimate™ User’s Manual
105
9.4 Zero Configuration Networking (Zeroconf)
The Talon Ultimate has the capabilities for Zero Configuration Networking (Zeroconf). Zeroconf
allows devices to automatically create a usable computer network based on the Internet
Protocol Suite (TCP/IP).
For example, when the Talon Ultimate is connected (connected via a network cable) directly to a
Windows based computer that is DHCP enabled, both the Talon Ultimate and the Windows
based computer will automatically configure themselves to be seen by each other using TCP/IP.
9.5 Configuring the Talon Ultimate with a static IP address
The Talon Ultimate is DHCP enabled by default. Some networks do not support DHCP and
require a static IP address. The Talon Ultimate can be configured with a static IP address and
needs to be connected to a network with DHCP first.
9.5.1 Step-by-step instructions – Static IP address
1.
Connect the Talon Ultimate to a network with DHCP.
2.
Turn the Talon Ultimate on. The Talon Ultimate should automatically
assign itself an IP address that the Windows computer can see. Go to
the
Statistics
screen on the Talon Ultimate and take a look at the
HostName and IPAddress.
3.
Using Telnet or SSH, connect to the Talon Ultimate. Instructions on how
to connect via Telnet or SSH can be found in
Section 9.3.1 or 9.3.2
.
4.
Once logged in to the Talon Ultimate via CLI, follow these steps to set
the IP address to a static IP:
a.
From the main prompt, type
command
then press the enter
key.
b.
Type
config
then press the enter key.
c.
Type
net del -n eth0
to delete the current network
configuration.
d.
The following information is required: a static IP, the netmask,
network gateway, the network nameserver, the domain. For
example:
i.
IP Address: 192.168.1.123
ii.
Netmask: 255.255.255.0
iii.
Gateway: 192.168.1.10
iv.
Nameserver: 192.168.1.10 (typically the same as the
gateway unless the network has a specific nameserver
IP.
v.
Domain: LG
Содержание TALON ULTIMATE
Страница 12: ......
Страница 14: ...GETTING STARTED Logicube Talon Ultimate User s Manual 6 ...
Страница 15: ...GETTING STARTED Logicube Talon Ultimate User s Manual 7 ...