Logicube TALON ULTIMATE, Руководство пользователя, Страница: 71 / 125

DEFAULT PASSWORDS
Logicube Talon Ultimate™ User’s Manual
63
Connect a USB cable (A Male to B Male USB cable, one was included with the
Talon Ultimate) between the computer and the Talon Ultimate. Connect the
USB B connector to the Talon Ultimate’s USB Device Port located on the back
panel of the Talon Ultimate. Connect the USB A connector to an available USB
port on the computer.
After a few moments, Windows should assign a drive letter to the selected
drive. The contents of the drive should now be accessible in Windows.
When finished, tap the DISENGAGE icon to disengage the USB mode. The USB
cable can now be disconnected from the computer and the Talon Ultimate.
Only one drive can be engaged at a time.
If the drive is not mounting properly, go to the Settings tab and change each
setting one at a time, then disengage and re-engage the drive.
5.0.5 Logs
The Talon Ultimate keeps logs of all imaging, hash, wipe,
format, and push operations. Logs can be viewed directly on
the Talon Ultimate or from a computer’s browser (if the Talon
Ultimate is connected to a network).
When using Drive to File mode (DD, E01, or EX01), log files are
also stored in the Destination drive in the same folder as the
image files.
The log files in the Destination drive are available in PDF, HTML,
and XML formats.
In addition to viewing, the logs can be exported to an external USB location such
as a USB flash drive. Logs are exported in PDF, HTML and XML format.