Operator manual
Corival
19
TERMINAL
P = 0W 0 rpm
♥
= 0/m*
esc esc
set p slope
SET DISPLAY
settings
syst
set
POWER
On
esc off on next
Notice:
♥
= 0/m*
Only displayed if HR option is being installed!
The ergometer is now ready for external control with an analog signal as previously
described. See for more information about analog control the user guide (only available in
English) supplied with the ergometer.
B.3.4
Terminal menu
Selecting the TERMINAL menu will show the following screen at the programmable panel:
Notice:
♥
= 0/m*
Only displayed if HR option is being installed!
The ergometer is now ready for digital external control. For more information about digital
external control using the RS 232 serial port see the user guide supplied with the ergometer.
B.3.5
System parameters menu
In the SYSTEM PARAMETERS different ergometry specific settings can be carried out as
described previously in the standard manual. On the programmable control panel you can
select the desired menu:
The menu displayed in capitals and repeated with an abbreviation under the confirmation
button
( )
is the one which can be activated. Selecting one of these menus will show you a
more extended display then described previously in this manual. As you can see with the
example of
SET DISPLAY
:
