Operator manual
Corival
21
Name 1
Step P= 0W t=00:00
1S dP=+050W dt=060s
esc next
protocol run
PROTOCOL EDIT
protocol delete
prot edit
accidentally, you get into to the TEST FUNCTIONS it can cause damage to the
ergometer operation and guarantee will be lost!
B.3.7
Protocol
In this paragraph the program possibilities under the menu PROTOCOL will be described:
You can select the menus PROTOCOL EDIT; PROTOCOL RUN and PROTOCOL
DELETE.
B.3.7.1
Protocol edit
The menu PROTOCOL EDIT allows you to program new exercise protocols or edit an
existing protocol. The memory capacity will allow you to save 50 protocols, all existing of
maximal 15 steps each. Pressing this menu will show you the list of protocols which have
already been made and the menu NEW.
With the
▼▲
keys you can select the desired protocol (in this example name1) to edit. Select
NEW to program a new exercise protocol and give the protocol a useful name maximal 10
characters with the
▼▲
keys. The allowed characters for the name are: ‘0’..’9’,’a’..’z’,
and ’ ’. Move the cursor with the confirmation button
( )
OK to the 10
th
position and the
program screen will appear:
On top the protocol name is mentioned. The second line will give you information about the
status of the programmed momentary workload (P) and time (t). The third line is the actual
program line. The stage number with the type of stage is mentioned, followed by the
programmable parameters (workload in the above example) and time. Those parameters are
displayed as
∆
Power (dP) and
∆
time (dt).
∆
P is the change in power expressed in watts.
∆
t
is the change in time expressed in seconds. The underlined character is the item which can be
New
name1
name2
esc ok
