Operator manual
Corival
34
E
SpO
2
option 928840
With option 928840 your Corival is able to perform stand alone or external controlled
measurement of functional oxygen saturation of arterial hemoglobin (%SpO2) and pulse rate
(BPM) for adult and pediatric test subjects. Keep in mind the fact that SpO2 measurements
during arm exercise is not possible due to movement artifacts. Do not attach the pulse
oximeter to the same limb as the Cuff of the blood pressure monitor or any other blood flow
restrictor. Loss of monitoring can occur due to the hindering of pulse measurement.
E.1
Precautions for Use
In the User Guide for your Corival Contraindications, Warnings and Cautions are stated. The
user should have knowledge of this information.
E.2
Using the SpO
2
Option
The SpO
2
comes together with the P-Display. After startup the Corival indicates correct
operation of the SpO
2
device by showing the following screen for a few seconds:
When in the sub menu SET DISPLAY of the SYSTEM PARAMETER SpO
2
is selected to be
displayed. As follows,
The following can be displayed.
The SpO
2
option also measures the heart rate and this value is displayed when the this display
setting is selected.
The SpO
2
option also report errors due to bad signals or improper handling. The following is
displayed when the sensor is not connected:
LODE
SpO2 Initialized
TERMINAL
P= 0W 0 rpm
♥
= 55/min SpO2= 98
ecs esc
SpO2
On
Esc Off On next
