1
1
Please observe the following
1.1
Emphasized Sections
WARNING!
Refers to safety regulations, and requires safety measures that protect the operator, or other
persons from injury or danger to life.
CAUTION!
Emphasizes what must be done, or avoided so that the unit, or other property is not damaged.
NOTICE:
Gives recommendations for better handling of the unit during operation, or adjustment, as well
as for service activities. The numbers printed in bold in the text refer to the corresponding
position numbers in the illustration on page 10.
• The point emphasizes an instruction step.
1.2
Items Supplied
UV Wand System UVC 97034
UV Safety Glasses
Footswitch
Operator Manual
Power Cord
2.5 mm Hex Key Wrench
15-pin Sub D Connector for PLC interface
Fuses (2) 3.15 A, 250 V.
Liquid Light Guide (5 mm x 1000 mm)
As a result of technical development, the illustrations and descriptions in this operating manual
can deviate in detail from the actual unit delivered.
1.3
For Your Safety
For safe and successful operation of the unit, read these instructions completely. If the
instructions are not observed, the manufacturer can assume no responsibility.
Be sure to retain this manual for future reference.
High voltage is generated at the ignition unit inside the lamp housing!
Any repair work and other interventions are to be handled by skilled persons only. The UV
Wand System generates high intensity UV radiation that, with direct exposure, can damage
skin and eyes in a short time.
For malfunctions in the regular operation of the shutter, avoid direct radiation of the skin
under all circumstances!
Avoid direct radiation of the skin and eyes under all circumstances!
Wear UV protective glasses and UV protective gloves!
☞
☞
8900398 97034 UVC Wand Syst 6/29/00 11:40 AM Page 3
