9
4
Installation
4.1
Environmental and Operating Conditions
The equipment should be installed in a dry, dust-free place.
Make sure to install the equipment in a place permitting free access of cooling air to the bottom
and to the back of the UV wand system.
4.2
Space Requirements
4.3
Lamp Module Assembly (Lamp
Replacement)
The changing of the lamp module
should be done only after the lamp has
completely cooled off.
• Disconnect the power cord.
• Remove the top cover of the unit by
unscrewing the two upper screws on
the left and right hand side of the unit
respectively.
• Disconnect the earth
cable.
340 mm
13.4"
97034
0 0 0
0
T
P
U
160 mm
6.3"
100-150 mm
4-6"
310 mm
12.2"
Space for
ventilation
8900398 97034 UVC Wand Syst 6/29/00 11:41 AM Page 11
