LOADMASTER LEGACY 3 Series, Руководство по профилактическому обслуживанию

Страница: 16 / 25

PREVENTIVE MAINTENANCE… LUBRICATION
GREASING THE “ZERKS”…
1 MAIN WRIST PIVOT PIN OF SWEEP TO SLIDER BLADES (2 ZERKS)
Grease WEEKLY
2
SWEEP CYLINDERS RODSIDE PIN AT SWEEP BLADE (2 ZERKS)
Grease WEEKLY
3 SWEEP CYLINDERS BASESIDE PIN AT SLIDER BLADE (2 ZERKS)
Grease WEEKLY
4 SLIDER CYLINDERS RODSIDE PIN (2 ZERKS)
Grease WEEKLY
5 SLIDER CYLINDERS BASESIDE PIN (2 ZERKS)
Grease every 6 MONTHS…remove
Upper-most sheet metal cover for access to these
6 CONTROLS RODS PLASTIC BEARING BLOCK (4 ZERKS)
Grease WEEKLY
7 TRACK CHANNELS FOR SLIDER SHOES (BRUSH-ON)
Grease MONTHLY
8 UPPER AND LOWER PINS OF TAILGATE LIFT CYLINDER (4 ZERKS)
Grease WEEKLY
9 ACCESS DOOR LATCH’S SLAM BOLT
Grease MONTHLY (or spray lube it)
10 TAILGATE HINGE TO BODY (2 ZERKS)
Grease MONTHLY
11
12
13 2-10 REEVER
OPTION “MULTIPLE” GREASE ZERKS
Grease MONTHLY
14 ROLL BAR
OPTION “MULTIPLE” GREASE ZERKS
Grease MONTHLY
OTHER LUBRICANTS…
OVERHAUL THE HYDRAULIC FLUID ONCE EVERY TWO YEARS, OR
SOONER IF CONDITIONS REQUIRE.
USE A BRAND-NAME HYDRAULIC FLUID IN AW46 GRADE.
This specification is a modern, “true” hydraulic fluid that has de-
emulsifiers, anti-oxidation, controlled lubricity and a complete additive
package tuned for hydraulic system durability.
 Always replace the hydraulic fluid if it appears milky
(entrained water).
 Always replace your hydraulic fluid
whenever you are
installing a new pump (along with a new return filter).
 Always replace the fluid after a “catastrophic” pump
failure (along with new return filter and new suction
strainer AND doing a “clean-up” procedure
first).
 Always install a new suction screen (in-tank or remove
old suction strainer and thoroughly clean old one) and
install new return filter element whenever you do
replace old hydraulic oil with new.
[Sec02-pg07]