LiteOn NA130 845PE Series, Руководство пользователя, Страница: 80 / 84

(4) Choose “Display list the known drivers” for this device so that
you can choose a specific driver then click “Next”.
(5) When the Windows 2000 supported SCSI adapter drivers list
appears, click “Have disk”.
(6) Insert the LITE-ON installer CD into CD drive.
(7) Click
“Manual Driver Setup\Serial ATA Driver”
to start the
installation.
(8) Click “Yes” to confirm continue the installation and copy the
driver to system.
(9) If you are using a driver that has not been digitally signed by
Microsoft, you will be asked if you want to continue the
installation. Click on “
Continue anyway
” .
(10) Remove the CD and click “Finish” to restart the system.
Windows 2000 will then restart for the driver installation to take
effect.
Confirming Windows 2000 Installation
(1) From Windows 2000, open the Control Panel from My
Computer icon followed by the System icon.
(2) Choose the Hardware tab, and then click the Device Manager
tab.
(3) Click the “+” in front of SCSI controllers. “Win2000 Promise
SATA150 TX2Plus (tm) IDE Controller” should appear.
80