LiteOn NA130 845PE Series, Руководство пользователя, Страница: 36 / 84

Chapter 3. BIOS Setup
The BIOS is a boot program located in a Flash Memory chip on the mainboard. It
is used to communicate with the hardware before the operating system (OS) takes
the control of the system. Its main function is to manage the setup of the
motherboard and interface card parameters, including simple parameters such as
time, date, hard disk drive, as well as more complex parameters such as hardware
synchronization, device operating mode, and the operating speed of the CPU.
Warning
Don’t change the parameters inside the BIOS unless you
fully understand their meanings and consequences:
The
parameters inside the BIOS are used to setup the hardware
synchronization or the device-operating mode. If the parameters
are not correct, they will produce errors, the computer will
crash, and sometimes you will not even be able to boot he
computer after it has crashed. We recommend that you do not
change the parameters inside the BIOS unless you are very
familiar with them. If you are not able to boot your computer
anymore, please refer to Chapter 2 Hardware Installation,
section 2-5 Jumpers -
“Erase CMOS data” .
Press <Del> to enter BIOS setup
Immediately press the < Del > key after power up the system. This will let you
access into the BIOS Setup menu. If the post disappears before you response and
the OS (operation system) starts, please restart the system by using the “Start” or
“Reset” button on the chassis.
36