LiteOn NA130 845PE Series, Руководство пользователя, Страница: 51 / 84

5. PCI / Plug and Play Setup
This setup page describes the configuration of the PCI bus system. This
section covers some technical terms and it is not recommended to alter
by amateur users.
AMI BIOS SETUP – PCI/PLUG AND PLAY SETUP
(C)2001 American Megatrends, Inc. All Rights Reseved
Clear NVRAM No Available Options:
PCI Latency Timer (PCI Clocks) 32 No
Init. Graphics Adapter Priority AGP/Int-VGA Yes
PCI IDE BusMaster Diabled
ESC : Exit : Sel
PgUp/PgDn : Modify
F1 : Help F2/F3 : Color
Clear NVRAM:
The NVRAM (Non Volatile Random Access Memory) is where the
BIOS stores the information for both PnP and non-PnP devices. When
the item is set to “Yes”, the system will reset the NVRAM right away
after the system is booted up, and then set the setting back to “No”
automatically.
Available options: Yes / No.
The default setting is
No
.
PCI Latency Timer (PCI Clocks):
This section specifies how long each PCI device can occupies the bus
before other PCI devices take over. Set the figure to higher value for
better PCI performance.
Available options: 32 / 64 /96 / 128 / 160 / 192 / 224 / 248.
The default setting is
32
.
51