LiteOn NA130 845PE Series, Руководство пользователя, Страница: 77 / 84

(3) If using a driver that has not been digitally signed by Microsoft,
you will be asked if you want to continue the installation. Click
on “
Continue anyway
”.
(4) When the New Hardware Wizard has finished installing the
SATA150 TX2Plus software, click on “Finish” to reboot the
system.
(5) Disconnect the hard disk cable and re-connect it to the onboard
ATA133 connector (yellow colored) and rebooting your system.
Windows XP setup will show a “New Hardware Found” dialog
box, and “WinXP Promise SATA150 TX2Plus (tm) IDE
Controller” will be displayed under “mass storage devices”.
Confirming Windows XP Installation
(1) From Windows XP, open the Control Panel from the My
Computer icon.
(2) Click on Performance and maintenance.
(3) Click on the System icon.
(4) Click the Hardware tab, then click the Device Manager tab.
(5) Click the “+” in front of SCSI controllers. WinXP Promise
SATA150 TX2Plus (tm) IDE Controller should appear.
77