LiteOn NA130 845PE Series, Руководство пользователя, Страница: 79 / 84

From the Windows 2000 Setup screen, press the “Enter” key. Setup
will now load all device files and then continue the Windows 2000
installation.
Note
If you need to specify any additional devices to be installed, do
so at this time. Once all devices are specified, continue to the
next step.
If you are using a driver that has not been digitally signed by
Microsoft, you will be asked if you want to continue the
installation. Click on “Continue” anyway.
Installing Driver in Existing Windows 2000 System
Warning
If you will be moving the boot drive containing existing
Windows 2000 operating system to the SATA150 TX2Plus
controller, the SATA150 TX2Plus driver MUST be loaded on to
this hard drive while it is still attached to your existing hard
drive controller. Do not attach this drive or any other hard drive
to the SATA150 TX2Plus controller before completing this
step.
(1) Choose Add New Hardware Wizard from the list, and then press
“Enter”.
(2) Choose Add/Troubleshoot a device and click “Next”. The new
hardware wizard will show device list
(3) Choose Mass Storage controller and click Next. At the following
screen click “Finish”.
79