LiteOn NA130 845PE Series, Руководство пользователя, Страница: 73 / 84

5-1 Installing the Hard Drives
The onboard SATA150 Controller (Promise PDC20375) supports up to two
Serial ATA150 hard drives and two Parallel ATA133 hard drives.
Important
If you wish to include your current bootable Serial or Parallel
ATA drive using the Windows NT 4.x, Windows 2000, or
Windows XP operating system onto the onboard SATA150
Controller.
You MUST install the SATA Windows NT4, 2000, or XP
driver software first onto this drive while it is still attached to
your existing hard drive controller.
Note
Do not connect any ATAPI devices such as CD-ROM,
DVD-ROM or CD-RW to the additional ATA133 IDE slot. This
additional ATA133 channel only support ATA hard drives.
1. Installing Parallel ATA Hard Drive
(1) Configure the jumpers of the Parallel ATA hard drive that
you’re preparing to connect to the onboard ATA133 controller
using the proper Master, Slave, or Cable-Select settings. For
more information, refer to the manual that came with your hard
drive.
(2) Install all of the hard drives into the hard drive bays of your
system, including their power cables.
(3) Attach the Parallel ATA cable to the hard drive(s) and to the
Parallel ATA connector on the mainboard. The colored edge of
the cable indicates pin 1. Connect the blue headed cable to the
connector (yellow colored) on the mainboard.
73