Lite-Check CERTIFIER 1200 Operations Manual
SETUP TESTING: “Controller” dropdown for Status
Click on
‘Controller”
“Controller” Dropdown options:
(Click on “Controller” to see this Controller status view.)
Serial Number:
The Serial Number of this Certifier 1200.
Firmware Version:
Level of the Firmware on the Controller Board.
Input/Supply Sensor Status:
Sensor status and air pressure before any changes are made by the Manifold.
Emergency Sensor Status:
Sensor status and air pressure available to the Emergency gladhand.
Service Sensor Status:
Sensor status and air pressure available to the Service gladhand.
Differential Sensor Status:
Sensor status and air pressure before any changes are made by the Manifold.
System Channel:
The Channel the Hub communicates on.
System Signal Strength:
The strength of communication between the 1200 Certifier and the Hub.
System Voltage:
Voltage available at this location.
Relay Voltage:
Voltage available at this location.
Set Controller Channel Number:
User input to change the System channel the Hub will communicate on.
NOTE:
The
Set Controller Channel Number
is the only item modifiable directly by the user in the ‘Controller Status’
section. All the others are only data points about the status of the Controller.
25