Lister Petter T Series Скачать руководство пользователя страница 47

Страница: 47 / 81

Statement of Indemnity

The information, specifications, illustrations,

instructions and statements contained

within this publication are given with our

best intentions and are believed to be

correct at the time of going to press.

Our policy is one of continued development

and we reserve the right to amend any

tech nical information with or without prior

notice.

Whilst every effort is made to ensure the

accuracy of the particulars contained within

this publication, neither the Manufacturer,

the Distributor nor the Dealer shall in

any circumstances be held liable for any

inaccuracy or the consequences thereof.

The information given is subject to the

Company’s current Conditions of Tender

and Sale; is for the assistance of users; and

is based upon results obtained from tests

carried out at the place of manufacture. This

Company does not guarantee that the same

results will be obtained elsewhere under

different conditions.

Parts that have not been approved by the

Lister Petter organisation cannot be relied

upon for correct material, dimensions or

finish. The Company cannot therefore

be held responsible for any damage

arising from the use of such parts, and the

guarantee will be invalidated.

027-08074

]

Copyright: Lister Petter

Group

Ltd

Содержание T Series


















































































Результаты поиска

Содержание T Series

Отзывы:

Похожие инструкции для T Series

Бренды по названию

Популярные бренды

Lister Petter T Series, Руководство оператора

Результаты поиска

Содержание T Series

Отзывы:

Похожие инструкции для T Series

Бренды по названию

Популярные бренды