Lister Petter T Series, Руководство оператора

Страница: 19 / 81

18
T series enGines operaTors' handbook
Figure 3.5 The start key.
5b.
if a starter button is being used:
Press the starter button until the
engine fires and then release it
immediately.
6.Turn the engine control lever (see
Figure 3.6.3 ) anti clockwise to the
run position.
7.If a variable speed control is fitted,
reduce the speed as required.
3.7 sToppinG The enGine
WarninG
After prolonged running, metal parts
of the stop control may become
hot; it is advisable to use suitable
hand protection when stopping the
engine.
engines without a fuel-control
solenoid:
1.Turn the engine control (Figure 3.2)
anti clockwise to the sTop position
and hold it there until the engine
comes to rest.
2.After the engine has stopped turn
the start key, if fitted, to the oFF
position.
CauTion
Turning the start key to the oFF
position will not stop the engine
unless an optional fuel control
solenoid is fitted.
engines with a fuel control solenoid:
1. Turn the key to the oFF position
(see
Figure 3.6.3
).
CauTion
never stop the engine by operating
the decompressor lever. This could
cause valve damage.