Lister Petter T Series, Руководство оператора

Страница: 63 / 81

6
tHe eCo28 alternator operators' Handbook
WarnInG
Starting and operating any diesel
generating set can be dangerous in
the hands of untrained people.
Operators must read and abide by
the instructions contained in this
manual as well as the engine and
genset handbooks supplied.
2.1 WarnInG symbols
Mechanical symbols are shown and
described in 'Section 01'
CautIon
This caution symbol draws attention
to special instructions or procedures
which, if not correctly followed, may
result in damage to or destruction of
equipment and/or personal injury.
WarnInG
A warning symbol with this type
of text draws attention to special
instructions or procedures which, if
not strictly observed, may result in
serious personal injury or death
danGer
A WARNING SYMBOL WITH THIS
TYPE OF TEXT DRAWS ATTENTION
TO SPECIAL INSTRUCTIONS OR
PROCEDURES WHICH, IF NOT
STRICTLY OBSERVED, MAY RESULT
IN IMMEDIATE SEVERE PERSONAL
INJURY, OR LOSS OF LIFE.
CautIon
This symbol identifies the type of
operator in charge of the operation
described. This qualification
requires a complete knowledge and
understanding of the information
contained in this instruction manual
2. safety preCautIons
as well as specific skills necessary
to perform installation, adjustment,
maintenance, cleaning and/or repair
operations.
CautIon
This symbol identifies the type of
operator in charge of the operation
described. This qualification
requires a complete knowledge and
understanding of the information
contained in this instruction manual
as well as specific skills necessary
to perform electrical operations
such as connections, adjustment,
maintenance and/or repair. The
electrical service man must be able
to work on electrical cabinets and
panels that are live.
2.1 before startInG
• Check that all air cooling inlets and
outlets are free of any obstructions.
The air outlets should not be near
any heating sources.
The cooling air temperature must be
equal to the environment temperature
and never higher than 40°C.
2.2 WHen tHe set Is at rest
Do not work on the alternator before
disconnecting the engine starter
battery. Failure to disconnect the
battery may allow the set to start up
automatically. Always disconnect the
negative terminal first and reconnect
last using insulated tools.
2.3 WHen tHe set Is runnInG
Do not touch any of the alternator
electrical connections.