Lister Petter T Series Скачать руководство пользователя страница 20

Страница: 20 / 81

T series enGines operaTors' handbook

4. enGine Fluids

4.1 oil speCiFiCaTion

To assist engine running-in, all engines

are despatched with an initial fill

lubricating oil which must be changed,

with the filter, after the first 100 hours.

All subsequent oil changes must

be as specified in 5.2. Maintenance

Schedule.

The engines must be run on heavy-

duty lubricating oils that at least

meet the requirements of one of the

following:

APICC

MIL-L-46152B

DEF2101D

MIL-L-2104B

Straight mineral oils are not suitable,

neither are oils of less detergency than

specified.

Higher specification oils meeting API

CD, API CE and API CF-4 are more

commonly available than API CC. The

use of these oils in new engines is

acceptable for topping up the first-fill

and following the first 100 hours when

running-in has been completed.

These oils are particularly suited to

engines running at a high-load factor,

or in conjunction with high ambient

temperatures. They must also be used

where the sulphur content of the fuel

exceeds 0.5%.

The oil must be suitable for 250-hour

oil changes without undue degradation,

with sump temperatures reaching

150°C (302°F) under severe tropical

conditions, and 120°C (248°F) under

normal conditions.

For engines in long running installations

Lister Petter should be consulted.

4.2 The chart shows the recommended oil viscosity grades for different temperature °C ranges.

A: intermittent running; B: synthetic oils only. Note:°F = (1.8 x °C) + 32.

Содержание T Series


















































































Результаты поиска

Содержание T Series

Отзывы:

Lister Petter T Series, Руководство оператора, Страница: 20 / 81

Результаты поиска

Содержание T Series

Отзывы: