Lissmac UNICUT 520, Руководство по эксплуатации

Страница: 42 / 92

42/92
6.3. Relocating using a crane
WARNING
Suspended loads
Risk of injury due to falling parts.
 Do not stay under raised machinery or parts.

Only use undamaged lifting gear with sufficient load-bearing capacity and length.

Only lift the machine in the transport position.
Sequence

Establish transport position (see 6.1)
 Suspend the floor saw into the crane eyelets using a sling with sufficient load-bearing capacity.

Avoid inclined positions

Determine a competent instructor before the lifting operation

Only use a suitable transport vehicle with an adequate load-bearing capacity
 Raise carefully and the observe the center of gravity

Always keep an eye on the floor saw

Proceed in accordance with the operating manual when recommissioning
1