Lissmac UNICUT 520, Руководство по эксплуатации

Страница: 40 / 92

40/92
6.2. Maneuvering in cutting or rapid traverse mode
WARNING
Risk of injury due to rotating saw blade
By touching the rotating saw blade clothes can become entangled and limbs severed.

Any movement of the machine outside the area where cutting work is to be performed must be
done using a non-rotating tool.

Always pay attention to the vicinity while traversing.

Always drive at the right speed.
Start combustion engine

Set the engine speed rotary knob (item 1) to the lowest possible position.

If necessary, release emergency stop (item 3).
 Move joystick (item 2) to the middle position.

Start the engine using the ignition key (item 4).
Joystick position when starting the machine.
If the joystick is not in the neutral position when starting, it must first be set to neutral position to be able to
move the machine.
At travelling speeds above 25m/min or steering angles of more than 11° in fast traverse mode,
the All-Wheel-Drive is automatically deactivated.
1 2 3 4