Liquivision kaon, Руководство пользователя

Страница: 78 / 107

Dive Computer
User Manual
Liquivision Products, Inc -
78
- Revision 1.9 Software 1.17
During your dive, you can:
●
Turn the stopwatch on and off (that is, display it on your screen, or remove it)
●
Start and pause the stopwatch
●
Reset the stopwatch
Please refer to the “
Stopwatch ” section of the manual for details.
The stopwatch format will match the dive time format you have previously selected, either: total
minutes or hours:minutes elapsed. Please refer to the “
Show Hours ” section of the manual for details.
However, the seconds value in the stopwatch is always displayed as a number, in a smaller font. It is
never displayed graphically, regardless of the setting you have selected for dive time seconds display.
The label “MAX” refers to the maximum depth you have reached over your entire dive. It is displayed
as a single number, without decimal places. It is displayed either in meters or in feet, depending on
your Units setting (refer to the “
Maximum Depth
Units ” section of the manual for details).
Your maximum depth will reset if you surface for more than 5 minutes.
The label “AVG” refers to the average depth you have reached over your entire dive. The average
depth count starts at the beginning of the dive.
Average Depth
You can reset your average depth once you reach the bottom by tapping into the underwater menus and
selecting “Reset AVG” (refer to the “
Reset AVG ” section of the manual for details). In that case,
average depth displayed here will be average depth since the last reset. It is displayed as a single
number, without decimal places.
It is displayed either in meters or in feet, depending on your Units setting (refer to the “
Units ” section
of the manual for details).
Your Average Depth will reset if you surface for more than 5 minutes.
Please note that the Average Depth that is saved in the Dive Log is not affected by the reset option – it
is average depth over the whole dive.
The time of day is displayed in hours and minutes. You can choose whether you want to have it
displayed as a 12-hours (AM/PM) format, or 24-hours (refer to the “
Time of day
Time/Date ” section of the manual
for details).
This is current temperature of surrounding environment.
Temperature